0
To repair your bootloop Cherrymobile Flare S3, you need a computer, a flashing software and a preloader, you will also need a Flare S3 Stock Rom

SP Flash Tool V5
Preloader

Choose one below:
Stock Rom (Flashable via SPFT) v11
Stock Rom (Flashable via SPFT) v1.03


PROCEDURE:

  1.     Download all needed requirement above and extract. Put each extracted files in one folder for easy locating.
  2.     Install the Preloader(Flare S3 drivers) to your PC. I recommend to turn off all your internet connection to retain the version of installed application. ( Restart PC if needed)
  3.     Open SP Flash tool (flash_tool) and click scatter-loading and locate MT6582_Android_Scatter.txt. For preparation, turn off your phone and remove the battery. If it is connected to your computer via usb cabe, unplug it.
  4.     Click Download and connect your phone using usb cable. After 3 second insert the battery. You probably hear a click sound in your pc for successful communication between your PC and phone.
  5.     Wait for the process to finish. A message will pop up for successful flashing. Done. your Cherrymobile Flare S3 is now good as new.

Post a Comment Blogger

 
Top